Nkọwa
Auto onwe mmezi C mwekota nwere elu-ọkwa 3 rivets nhazi onwe nhazi, CRV arụrụ ọrụ mwekota isi, okpomọkụ ọgwụgwọ, elu na-egbuke egbuke nickel plated ọgwụgwọ.
Steel stamping aka na akpalite, ọkpụrụkpụ nke nnukwu aka bụ 2.0MM, ọkpụrụkpụ nke obere aka na akpalite bụ 1.5MM, na okpomọkụ ọgwụgwọ, n'ozuzu nickel plating ọgwụgwọ, nwa agba tinye na njedebe nke triga.
Igwe PP + TPR nwere agba abụọ emebere dị ka ergonomics bụ mgbochi-slip na inogide.
The akpaaka onwe mmezi c mwekota handle nwere ngwa ngwa kpochidoro na ntọhapụ usoro, nke nwere ike ijide workpiece na-enweghị deformation, na nchekwa ntọhapụ Ọdịdị nwere ike hụ na ọzọ nchekwa na-arụ ọrụ.
Ngosipụta ngwaahịa
Nkọwapụta:
| Nlereanya Mba | Nha | Ụdị | |
| 520251007 | 175mm | 7" | Aka plastik nwere agba abụọ, nickel plated elu |
| 520251010 | 250mm | 10" | |
| 520251011 | 275 mm | 11" | |
| 520251019 | 480mm | 19" | |
| 520252007 | 175mm | 7" | Aka plastik nwere agba abụọ, oji okokụre elu |
| 520252010 | 250mm | 10" | |
| 520252011 | 275 mm | 11" | |
| 520253019 | 480mm | 19" | |
| 520253007 | 175mm | 7" | Aka igwe, nickel plated elu |
| 520253010 | 250mm | 10" | |
| 520253011 | 275 mm | 11" | |
| 520253019 | 480mm | 19" | |
| 520254007 | 175mm | 7" | Aka igwe, oji okokụre elu |
| 520254010 | 250mm | 10" | |
| 520254011 | 275 mm | 11" | |
| 520254019 | 480mm | 19" | |
| 520255007 | 175mm | 7" | Agba agba abụọ rọba wụsara oroma, nickel plated elu |
| 520255010 | 250mm | 10" | |
| 520255011 | 275 mm | 11" | |
| 520255019 | 480mm | 19" | |
| 520256007 | 175mm | 7" | Agba agba abụọ rọba wụsara oroma, nwa elu |
| 520256010 | 250mm | 10" | |
| 520256011 | 275 mm | 11" | |
| 520256019 | 480mm | 19" | |
Ngwa nke akpaaka onwe-mgbanwe C mwekota:
A na-ejikarị akpaaka na-emegharị C mwekota n'ịrụ osisi, mgbakọ arịa ụlọ, ịkwanye nkume na mpaghara ọrụ ndị ọzọ.
Usoro nke imezi onwe onye c ụdị clamps:
1. Mbụ, mepee agba nke auto self-mgbanwe C mwekota site na-ekewa abụọ aka, na-etinye ihe a ga-clamped n'ime agba.
2. Mgbe ahụ, jide akpaaka onwe-agbanwe C mwekota aka ka igbachi .
3.N'ikpeazụ, pịa ma jide ngwa ngwa-ahapụ ka hapụ ya.
